Camrivox Flexor 500, Руководство пользователя

Страница: 17 / 76

IP Telephone User Guide
17
Once this screen is shown it should be possible to make calls.
If you wish to manually change the network setting see section
Network
settings
on page
35
for more information.
If your Flexor 500 has been supplied to you by your Voice
Over IP Operator or ITSP then you probably do not need to
configure the device. Once connected correctly the Flexor
500 will configure itself automatically with your operator’s
settings enabling you to make calls straight away. If this is
not the case see
Configuring the Flexor 500
below.
If the device has not been supplied configured by your ITSP then the
process will stop at the SIP account stage and then display a screen with
the management web page details.
The web page URI has the form shown but the exact address depends on
your network settings.
In this case the device needs to have the account configured from the
management web pages as described below.
Configuring the Flexor 500
This section describes how to configure the Flexor 500 using the Flexor
500 management web pages. Follow
Step 1b if using VoiceConnect, else
follow Step 1a .
Step 1a. Accessing the web pages without using VoiceConnect
If you have not installed the Voice Connect application, you will need to find
the URL used to access the Flexor 500 management web pages.
The management web page address can be found by pressing the
IP
soft
key during the start up process or from the
IP Address
option on the main
menu.
Note