IP Telephone User Guide
23
The display shows the dialled digits as they are entered. If an incorrect
digit is pressed then the C button can be used to delete the last digit.
After entering the digits for the number press the
Call
soft key to dial the
number.
A set of valid number formats and lengths may have been configured
based on your region by your service provider. The number will be dialled
automatically when a recognised pattern has been entered. Some patterns
are dialled immediately (typically full numbers with area code) while
others may be dialled after a few seconds delay.
Using the contacts list
The Flexor 500 has an built in address book. The entries in this can be
synchronized from Microsoft Outlook using the Voice Connect application.
Entries can also be added using the Flexor 500 web pages and from the
call history from an incoming call.
The address book is held in permanent memory within the device and is
able to hold up to 300 entries. The web pages provide an alternative
interface to the same list of names.
To make a call using the address book first lift the receiver or press the
hands free button to get a dial tone. Press the
Addr
soft key to view a list
of your contacts.
The screen shows up to three names with one highlighted name. Use the
up / down keys to scroll through the list.
Each name can have up to three numbers associated with it. These are
marked as Home (H), Work (W) and Mobile (M). Scroll between the
numbers for the selected name using the * key.
Press the
Call
soft key to dial the highlighted number.
