2
Connecting handset to Flexor 500
a
b
2a
Connect one end of the handset cable to the socket
on the left side of the Flexor 500 base as shown above.
2b
Connect the other end of the headset cable to the
socket in the handset as shown above.
3
Connecting Flexor 500
c
a
b
3a
Using the supplied Ethernet cable connect your local area network (LAN) to the LAN port of the
Flexor 500 base.
3b
Optional. If your PC has an Ethernet connection to your local area network (LAN), unplug the end of
the cable connected to your switch, router or hub and connect this to the PC port of the Flexor 500 base.
3c
Connect the power connector to the Flexor 500 base and plug in the power adaptor to a suitable wall
socket and turn the power on at the wall socket. Only use the supplied power adaptor.
