6
FR270W / FR270SS
4. INSTALLATION INSTRUCTIONS
1. The refrigerator should be located in a completely flat surface, Leave 5-1 0 cm
between each side of the appliance and the wall, and leave 30 cm between the
top of the appliance and the ceiling.
2. Choose a location which is not exposed to sunlight, high temperature or humid ,
as humidity may cause stain.
3. Pulled out the bottom panel before installation.
4. The appliance can be adjusted by rolling its two legs in front the bottom when it
is unstable. Rolling in clockwise can rise up the machine.
5. The location should be firm and flat. An un-securely position may cause noise
and liberation:
(a) The noise may be increased if the floor is not firm.
(b) Put a sheet under the appliance for solving the heat emission if you need to
locate it onto a carpet.
6. Make sure the adjustable legs are clung to the floor, and set the appliance slope
backward slightly for keeping the doors closed tightly.
5. OPERATION INSTRUCTIONS
PLACEMENT OF FOOD
1. There should always be some space between items inside for air circulation.
2. Food should be kept in sealed package to avoid becoming dry or with odour.
3. Hot food should be cooled down before placing into the appliance. Otherwise,
interior temperature and electronic consumption will increase.
4. Reduce the frequency of door opening can efficiently low down the electronic
consumption.
Warning: Do not use any electronic equipment inside the appliance.
INSTRUCTION FOR USAGE
The temperature of refrigerator can be controlled manually by the knob. However,
the number shown on the knob does not directly represent the temperature.
Instead, the larger the number is, the lower the interior temperature will be. 0
stands for off. Turn the knob to state 4 when it is normal used, turn it to the state
during 4-7 if a lower interior temperature is required; contrarily, to the state during
4-1, when a higher one is needed.
ENG
