Camplux JK-5330, Инструкция по установке и эксплуатации, Страница: 5 / 24

Visit Us: Camplux.com
support@camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475
3
www.camplux.com
Assembly Instructions
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR
OPERATING YOUR STOVE.
Inspect contents of the box to ensure all parts are included and undamaged.
Step 1: Put the stove on a flat surface outdoor.
Step 2: Open the lid to stand position.
Step 3: Make sure the burner control knobs are in “OFF” position.
Step 4: Attach regulator assembly to stove fittings. HAND TIGHTEN ONLY. Do not cross-thread connection.
Step 5: Attach propane cylinder to the regulator assembly by turning propane cylinder clockwise. HAND TIGHTEN
ONLY. Do not cross-thread connection.
CAUTION:
The cylinder must stay upright. See the diagram on this page.
Step 6: Apply “Gas Leak Testing” as described in this manual.
NOTE: Propane cylinder should be positioned to a minimum of 7.9 in. (200 mm) from the stove.
This appliance shall only be used with the regulator supplied with this appliance.
This appliance shall only be used with a propane gas cylinder certified to DOT 39.
IT MAY BE HAZARDOUS TO ATTEMPT TO FIT OTHER TYPES OF REGULATOR AND GAS CONTAINERS.
ONLY USE IN WELL-VENTILATED AREAS.
7.9 in.
(200 mm)
Cooking grill
Notched support arm
Push up
and turn until
tight
Attach
Pull down
and turn until
separated
Detach