SPECIFICATIONS
CONNECTION DIAGRAM
•
Transmission Distance:
≤
40km
•
Fiber Type: Single Mode
•
Fiber Connector: LC
•
SFP+ Optical Fiber Module Wavelengths: 1270nm (T), 1330nm (R)
•
Bi
-
Directional IR
-
Support Bi
-
Directional Ir Pass Back, Supports 20
-
60khz Ir Devices
•
Audio Format: LPCM 7.1/DTS
-
HD/DTS
-
Audio/Dolby Digital Plus/Dolby TrueHD/Dolby Digital/Dolby Atmos
•
Arc
-
Support Arc Back to Tx
•
Rs
-
232
-
Support Rs
-
232 Passthrough and Command Control
•
Supported Resolutions: 720P@50/60Hz, 1080P@24 /25 /50/60 Hz, 1080i@50 60Hz, 1024*768 @60Hz,
1280*768@60Hz, 1280*800@60Hz, 1280*960@60Hz, 1280*1024
Video Source
HDMI
HDMI Display
TX
Single Fiber LC
-
LC Connection
Single Mode
HDMI In
HDMI Display
Speakers
RX
Connection Instructions:
1.
Connect the source device to the HDMI In port of the transmitter with an HDMI cable, connect the HDMI Out port of the receiver to the display
device with another HDMI cable.
2.
If it is a one to one connection, then use a fiber optic cable to connect the SFP port to the transmitter and receiver. If it is a one to many, use the
10 Gigabit switch as a bridge to connect the transmitter and receivers with the fiber optic cable respectively.
3.
If using the HDMI loop out feature, connect the display device to the HDMI Out port of the transmitter.
4.
If using the IR pass back function, the IR blaster extension cable should be plugged into the IR out port of the transmitter and receiver, the IR
receiver extension cable should be plugged into the IR In port of the transmitter and receiver.
5.
If using the HDMI ARC feature, connect the ARC interface of the transmitter to the speaker with an optical fiber cable. If you need additional
audio from the receiver, connect the S/PDIF Out interface of the receiver to the audio device with an optical fiber cable.
6.
If using the RS
-
232 function, connect the RS
-
232 port of the transmitter or receiver to an external device.
7.
Plug the power supply into the devices to get started.
