1. When purchasing your quick disconnect parts, make sure that they are compatible with the quick
disconnect parts on your RV.
2. Buy a complete quick disconnect assembly, so you can hook the female part to the regulator you are
going to remove from the Campfire In A Can.
3. Determine if the quick disconnect you are hooking up to on your RV is high pressure or low pressure.
4. Always use gas line silicone tape on all fittings or a gas line approved paste.
5. Always check for gas leaks by covering joints with a mild solution of soap and water then pressurizing the
propane line. Check for bubbles. If you see bubbles, tighten the fittings and repeat until no more
bubbles are seen.
Helpful Hints
HIGH PRESSURE QUICK DISCONNECT PROCEDURE
Determine if the quick disconnect you are hooking up to on your RV is high pressure or low pressure. If there
are no propane lines before the propane regulator, then the quick disconnect on your RV is low pressure. If
there are propane lines before the regulator, your quick disconnect could be high or low pressure. Contact the
manufacturer of your RV to find out which one it is.
1. Remove the POL/QCC from the
regulator
.
2. Install male quick disconnect fitting
into regulator.
12
Toll Free 1.888.768.7737
Types of Quick Disconnects
2
1
1. With a built in safety shut off valve. 2. Without a safety shut off valve.
3. Install female quick disconnect onto
POL/QCC
Recommended
Style
R
Attaching the Campfire
to a Quick Disconnect
Email: [email protected]
13
Toll Free 1.888.768.7737
