1. Open
Short Cut
and create a new program.
2. Double-click the data logger model.
3. In the Available Sensors and Devices box, type 05103, 05106, or 05305 AQ or locate the
sensor in the Sensors > Meteorological > Wind Speed & Direction folder. Double-click
05103 Wind Speed & Direction Sensor, 05106 Wind Speed & Direction Sensor, or 05305-AQ
Wind Speed & Direction Sensor. The wind speed defaults to meters/second. This can be
changed by clicking the Wind Speed box and selecting one of the other options.
4. Click on the Wiring tab to see how the sensor is to be wired to the data logger. Click OK
after wiring the sensor.
5. Repeat steps three and four for other sensors. Click Next.
Wind Monitor Series
3
