manualshive.com logo in svg

Campbell TX320, Инструкция по эксплуатации

Поделиться
Скачать
Campbell TX320 Скачать руководство пользователя страница 19

TX320 Transmitter 

4.  SatCommand Software 

Certain information required by NESDIS is unique to each DCP.  This setup 
information includes: platform ID, transmission baud rate, channel number, 
scheduled transmission time, offset time, and message window length.  The 
TX320 has non-volatile memory to store the setup information.  The setup 
information is entered in the SatCommand software, then transferred to the 
TX320.  SatCommand software is a 32-bit windows application.  The TX320 
can be setup using terminal emulation software, but the process requires 
knowledge of the ASCII commands.  See the appendix section for a list of 
appropriate commands. 

4.1  Install SatCommand 

Follow instructions on the disk. 

4.2  SatCommand General Description 

SatCommand has a status window, a terminal window, several control buttons, 
a main menu, and an edit window used to make setup changes.  

The Terminal window is used to manually enter commands to the transmitter.  
The Status window is used to display information regarding the current state of 
the transmitter.  The control buttons are used to initiate some communications 
between the computer and the TX320 transmitter.  The main menu is across the 
top of the screen and includes some file control functions, a list of commands 
that can be sent to the transmitter, and a couple of tools.  The edit window is 
where changes to the transmitter setups are to be entered and saved for later 
use.  

4.3  Making Edits 

Edits are made in the configuration window.  The configuration window has 
two columns; use the right column for all edits.  When SatCommand is first 
started, a default setup template is loaded.  If the Retrieve Settings button is 
selected, the current configuration of the TX320 will be loaded to the fields of 
the edit window. 

4.3.1  NESDIS ID 

Edit the NESDIS ID number (also called Platform ID).  Type in your NESDIS 
assigned ID number.  This is an 8-digit hex number.  Valid characters are 0-9, 
A, B, C, D, E and F.  Example: 4F3E2D1E  

4.3.2  Timed Channel 

The Timed Channel is the NESDIS assigned self-timed transmission channel.  
When using 100 and 300 baud, valid channel numbers are between 0 and 267.  
When using 1200 baud, valid channel numbers are 0 to 133.  For 1200-baud 
channels, the formal channel designation is the channel number followed by 
the letter A, for example: 99A.  For clarification, see Appendix D.  If your 
assigned channel number does not include the letter A, either you don’t have a 
1200-baud channel assignment or you’ve been given a 100/300 channel 

9 

Содержание TX320













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды