3. In the Available Sensors and Devices box, type SoilVUE10 or locate the probe in the
Sensors > Soil folder. Double-click SoilVUE10 Complete Soil Profiler. Type the correct
SDI-12 Address; default address is 0. The Probe length defaults to 0.5 m. This is changed by
clicking the Probe length box and selecting 1 m. Select whether to Measure every hour
(default) or every fifteen minutes. For each measurement depth, temperature defaults to
degrees Celsius. This can be changed by clicking the Deg C box and selecting Deg F, for
degrees Fahrenheit, or K for Kelvin.
4. Click the Wiring tab to see how the probe is to be wired to the data logger. Click OK after
wiring the probe.
5. Repeat steps three and four for other sensors.
SoilVUE™10 Complete Soil Profiler
3