Appendix E. SkyVUE 8M
Laser/APD module replacement
Basic procedure:
1. Isolate the SkyVUE 8M from all sources of power.
2. Remove the access door using the supplied key.
3. Disconnect the cables from the Power Supply Unit (PSU) including the battery.
NOTE:
It is very important to disconnect all sources of power from the SkyVUE 8M to ensure
that the laser is not powered.
4. Unscrew the two securing screws from the PSU chassis plate so it can be pulled out to gain
better access to the Laser and APD module.
5. Now the Laser module and avalanche photo diode (APD) module will be visible.
SkyVUE™8M Tactical LIDAR Ceilometer
101
Содержание SkyVUE 8M
Страница 1: ...Revision 11 2020 Copyright 2020 Campbell Scientific Inc ...
Страница 105: ...SkyVUE 8M Tactical LIDAR Ceilometer 100 ...