5. Features
l
Provides representative average snow depth of the target area
l
Filters out erroneous measurement data caused by noise or foreign materials
l
Detects new snowfall quickly and reliably
l
Operates on natural ground or snow plate
l
Compact and light
l
Simple installation process
l
After mounting, the sensor performs a fully automatic calibration process to calculate
install angle and height
l
Output data on SDI-12 or RS-232 serial data interface
l
Compatible with Campbell Scientific CRBasic data loggers: CR200(X) series, CR300 series,
CR6 series, CR800 series, CR1000, CR1000X series, CR3000, and CR5000
6. Specifications
Power supply:
Requires 12 to 15 Vdc power supply capable of
providing up to 2 A continuously.
Current draw
Standby:
Active:
Heater:
50 mA
250 mA
1300 mA
Cable:
Type:
Maximum length:
3-Cond 20 AWG, 2 Pair 24 AWG
14 m (45 ft)
SDMS40 Multipoint Scanning Snowfall Sensor
5
