Campbell RavenXT G2212-C, Инструкция по эксплуатации, Страница: 30 / 54

RavenXTG GPRS/EDGE Sierra Wireless Cellular Modem
2. Check your LoggerNet setup.
a. Make sure the port number at the end of the IP address matches the
port number of the RavenXTG (e.g., 3001, see FIGURE 7-1).
FIGURE 7-1. Device Port configuration
b. Try adding a few seconds to the extra response time on the IP Port in
LoggerNet (you should not need more than 5 seconds).
c. If you are trying to communicate to a PakBus datalogger:
i. Verify the PakBus address in the setup screen matches that of the
datalogger.
ii. If you have multiple PakBus networks/ports setup in LoggerNet,
uncheck the ‘PakBus Port Always Open’ options on all PakBus
ports.
24