Campbell PONDVIEW 4.0, Инструкция по эксплуатации

Страница: 13 / 38

Section 1. Setting Up the Network and Communicating
1-3
then the PakBusPort, then the CR10X-PB, this is the path of communication
from the PC to the CR10X-PB.
A new device can be added to the network device map by choosing Edit | Add
from the Setup menu. The Add Device Window will appear.
When you select an item from the left side of the Add Device window, valid
connections will be displayed in the right-hand column. Highlight the item to
which you want to attach the device and select the
Add Now button. Continue
to add devices in this manner until your network map is complete.
For direct connection to the CR10X using short RS232 connection, RAD Short
Haul Modems, or RF400 Spread Spectrum Radio the device map would be: