Campbell PC208W, Инструкция по эксплуатации

Страница: 124 / 156

Section 6. Program Conversion
6-2 PC208W, Version 3.3, Instruction Manual
file(s) will be processed immediately. The translated file(s) will be saved to
your current directory.
To view an Edlog programming file, choose View File from the File menu.
To clear the display, choose Close File. The program is terminated by
choosing Exit.
6.2.2 Options Menu
When the Options menu item is chosen, the following dialog box appears on
the screen:
FIGURE 6.2-1. Xlate Options Dialog Box
The 21X dataloggers could be ordered with special PROMS which set the slow
integration rate to 50 Hz (20 ms). Since the CR23X supports both 50 Hz and
60 Hz integration times, you must select the "21X Program written for 50 Hz
PROMs" checkbox if the 50 Hz integration method is to be used.
You can toggle between the remaining two options to choose the output file
type. When "prompt for destination filename" is chosen, only one file can be
processed at a time, and you must enter a name for the translated file. The
processed file is given a .CSI extension.
Choosing "batch mode, change source file extension to 21X", allows you to
process multiple files at once. To select the files, highlight the first file and
then press and hold the Ctrl key on your computer keyboard while you select
the remaining files. When all files have been selected, choose OK. You will
not be prompted for a filename. The translated files will be given the name of
the original CR21X files, and the original files will be renamed with a *.21X
extension (i.e., a 21X file named site1.CSI will be renamed site1.21X when the
translation process is complete).