Campbell NL110, Инструкция по эксплуатации

Страница: 6 / 30

NL110 NTCIP Interface
2
NL110
NETW
ORK LINK INTERF
ACE
POWER
RS485
Logan, Utah
RS485
CS I/O
CS I/O
RS232
RS232
LAN
LINK
10 B
ASE
T
MADE IN
USA
SN:
10 BASE
T
LINK
LAN
G 12V
FIGURE 1. NL110
1.2 Specifications
Standards
Ethernet Standard IEEE 802.3 (CSMA/CD Access Method)
TCP/IP Protocol
Case Dimensions
9 ¼” x 4 ¼” x 1”
Environment
Temperature: -25
°
to +50
°
C
Power Supply Requirements
The NL110 is powered via the green G 12 V connector (11 to 16 VDC at
140 mA average current) on the front panel of the unit.
Cable Specifications
The Ethernet 10 Base-T cable should be a Category 5 twisted pair cable.
The two active pairs in an Ethernet 10 Base-T network are pins 1 and 2
and pins 3 and 6. Use only dedicated wire pairs (such as blue/white and
white/blue, orange/white and white/orange) for the active pairs.
RJ-45 Pin-Outs: Pin 1 = TD+, Pin 2 = TD-, Pin 3 = RD+, Pin 6 = RD-
Corner Screws
Mounting Tabs
12 V Power
Connection
RS485 Ports
CS I/O Port
RS-232
10 Base-T Link
Communication
Indicator LEDs