Campbell KH20 Скачать руководство пользователя страница 20

Страница: 20 / 64

Appendix C. EasyFlux

DL CR6KH20

C-2

The VOLT116 and CDM-A116 are functionally the same,

however their OSes are not interchangeable. If updating an OS,

make sure it is for the correct model.

C.2 Precautions

EasyFlux DL CR6KH20

requires the CR6 to have operating system (OS)

version 09.02 or newer. If using a VOLT116, it must have OS v.01 or

newer, or if using a CDM-A116, it must have v.06 or newer.

The program applies the most common EC corrections to fluxes. However, the

user should determine the appropriateness of the corrections for their site.

Campbell Scientific always recommends saving time-series data in the event

reprocessing of raw data is warranted. Further, the user should determine

the quality and fitness of all data for publication, regardless of whether

said data were processed by

EasyFlux DL CR6KH20

or another tool.

EasyFlux DL CR6KH20

is not encrypted, users have the ability to view and

edit the code. However, Campbell Scientific does not guarantee the

function of an altered program.

C.3 Wiring

When wiring the sensors to the data logger or VOLT116, the default wiring

schemes, along with the number of instruments

EasyFlux DL CRKH20

supports, should be followed if the standard version of the program is being

used. TABLE

C-1

through TABLE

C-13

present the wiring schemes.

A KH20 and CSAT3B are the only required sensors for the program. The

additional sensors described in the following tables are optional, although the

CS106 and FW3 are recommended. Many of the optional sensors are wired to a

VOLT116 (or CDM-A116) module, which effectively increases the CR6

analog terminals. If one or more of the optional sensors are not used, the data

logger or VOLT116 terminals assigned to those sensor wires should be left

unwired.

If the standard data logger program is modified, the wiring

presented in TABLE

C-1

may no longer apply. In these cases,

refer directly to the program code to determine proper wiring.

If using an analog expansion module, all wiring and connections

are the same whether using a VOLT116 or a CDM-A116.

Therefore, throughout this appendix, the wiring terminals are only

listed for the VOLT116.

NOTE

Содержание KH20
































































Результаты поиска

Содержание KH20

Отзывы:

Бренды по названию

Популярные бренды

Campbell KH20, Руководство по эксплуатации продукта

Результаты поиска

Содержание KH20

Отзывы:

Бренды по названию

Популярные бренды