KH20 Krypton Hygrometer
4
Figure 2. Proper mounting position of the electronics box.
If the electronics box is not pushed all the way up during mounting,
you will not have enough room to attach the connectors to the
bottom of the electronics box, as the U-bolt for the rain shield will
block the position of the connectors.
3.
Mount the rain shield onto the tripod or tower mast using the U-bolt provided.
Make sure that the distance between the KH20 sensor head and the rain shield
is within 5 feet so that the cables from the sensor head will be within reach of
the electronics box. Also make sure that the rain shield is mounted vertically
with an opening pointing downward so that the rain will effectively run down
the rain shield and not penetrate inside.
NOTE
