Campbell HydroSense II HS2, Руководство по эксплуатации продукта

Страница: 31 / 50

HS2 and HS2P
19
100 zones. When the zone data file is full, a new zone cannot be created until
an old zone is removed.
The configuration settings file is managed automatically. These settings are
synchronized to the computer where they can be viewed, modified, backed up,
and restored. For more information, please refer to the HydroSense II Support
Software user guide.
8.3 Software
The HydroSense II ships with the latest version of the HydroSense II Support
Software on CD. For the latest version, please contact Campbell Scientific. For
a complete guide to the use of this software, please refer to the HydroSense II
Support Software user guide.
8.4 Connecting via Bluetooth
Steps to achieve a Bluetooth connection:
• Start HydroSense II Support Software.
•
Turn on the HydroSense II display by holding the button for 3
seconds.
• In HydroSense II Support Software, click the Discover button to find
Bluetooth devices within range.
•
When the HydroSense II unit is discovered, click the “Connect” button.
The first time the HydroSense II unit is used with a new computer, the
computer and HydroSense II must be “paired” before a connection can be
made. The pairing code is “1234”. For more information, please refer to the
HydroSense II Support Software user guide.
While a Bluetooth connection is open, the HydroSense II will not shut down.
Turn off the HydroSense or disable the Bluetooth once data have been
collected or settings have been updated to avoid early depletion of the batteries.
8.5 Collecting Data
Before collecting data, establish a Bluetooth connection (Section 8.4 ,
Connecting via Bluetooth
(p. 19)
). Data are downloaded to the computer by
clicking the “Synchronise” button in HydroSense II Support Software. The
synchronization process downloads new water content data and updates the
zone table and configuration settings.
For more information, please refer to the HydroSense II Support Software user
guide.
9. GPS
The HydroSense II incorporates a receiver for the Global Positioning System
(GPS). To calculate position, the GPS module must receive radio time signals
from at least four satellites simultaneously. If the receiver detects signals from