Campbell EE181, Руководство по эксплуатации продукта

Страница: 5 / 26

4. QuickStart
A video that describes data logger programming using Short Cut is available at:
www.campbellsci.com/videos/cr1000x-data logger-getting-started-program-part-3 . Short
Cut is an easy way to program your data logger to measure the sensor and assign data logger
wiring terminals. Short Cut is available as a download on www.campbellsci.com . It is included
in installations of LoggerNet , RTDAQ , and PC400 .
Use the following procedure to get started.
1. Open Short Cut and click Create New Program.
2. Double-click the data logger model.
3. In the Available Sensors and Devices box, type EE181 or locate the sensor in the Sensors >
Meteorological > Relative Humidity & Temperature > EE181 Temperature and Relative
Humidity Sensor folder. Double-click either EE181 (constant power) or EE181 (panel
switched power); the panel switched power option uses less current but requires a scan
rate that is greater than 5 seconds. Data defaults to degree Celsius. This can be changed by
clicking the Deg C box and selecting Deg F, for degrees Fahrenheit, or K for Kelvin.
EE181 Temperature and Relative Humidity Probe 2