Campbell DOT600 страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 28

background image

Warranty and Assistance

The

DOT600 ROADBED WATER CONTENT METER

is warranted by

CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and
workmanship under normal use and service for twelve (12) months from date
of shipment unless specified otherwise. Batteries have no warranty.
CAMPBELL SCIENTIFIC, INC.'s obligation under this warranty is limited to
repairing or replacing (at CAMPBELL SCIENTIFIC, INC.'s option) defective
products. The customer shall assume all costs of removing, reinstalling, and
shipping defective products to CAMPBELL SCIENTIFIC, INC. CAMPBELL
SCIENTIFIC, INC. will return such products by surface carrier prepaid. This
warranty shall not apply to any CAMPBELL SCIENTIFIC, INC. products
which have been subjected to modification, misuse, neglect, accidents of
nature, or shipping damage. This warranty is in lieu of all other warranties,
expressed or implied, including warranties of merchantability or fitness for a
particular purpose. CAMPBELL SCIENTIFIC, INC. is not liable for special,
indirect, incidental, or consequential damages.

Products may not be returned without prior authorization. The following
contact information is for US and International customers residing in countries
served by Campbell Scientific, Inc. directly. Affiliate companies handle
repairs for customers within their territories. Please visit
www.campbellsci.com to determine which Campbell Scientific company
serves your country.

To obtain a Returned Materials Authorization (RMA), contact CAMPBELL
SCIENTIFIC, INC., phone (435) 753-2342. After an applications engineer
determines the nature of the problem, an RMA number will be issued. Please
write this number clearly on the outside of the shipping container.
CAMPBELL SCIENTIFIC's shipping address is:

CAMPBELL SCIENTIFIC, INC.

RMA#_____

815 West 1800 North

Logan, Utah 84321-1784

For all returns, the customer must fill out a “Declaration of Hazardous Material
and Decontamination” form and comply with the requirements specified in it.
The form is available from our website at

www.campbellsci.com/repair

. A

completed form must be either emailed to

[email protected]

or faxed to

435-750-9579. Campbell Scientific will not process any returns until we
receive this form. If the form is not received within three days of product
receipt or is incomplete, the product will be returned to the customer at the
customer’s expense. Campbell Scientific reserves the right to refuse service on
products that were exposed to contaminants that may cause health or safety
concerns for our employees.

«
1
2
3
4
...
»

Содержание DOT600





























Отзывы:

Нет отзывов

Похожие инструкции для DOT600

Бренд: DAKOTA ULTRASONICS Страницы: 48

Бренд: TE Connectivity Страницы: 9

Бренд: Macnaught Страницы: 4

Бренд: Tascam Страницы: 4

Бренд: Harpers Страницы: 8

Бренд: YOKOGAWA Страницы: 53

Бренд: Garmin Страницы: 22

Бренд: Sonel Страницы: 84

NOVAplus biogas

Бренд: mru Страницы: 78

Бренд: Eurotron Страницы: 122

Бренд: Agilent Technologies Страницы: 20

Бренд: International Light Technologies Страницы: 19

Бренд: EIJKELKAMP Страницы: 11

Бренд: East Tester Страницы: 36

Superstatic 749

Бренд: Sontex Страницы: 24

HD52.3D... series

Бренд: DeltaOHM Страницы: 46

Бренд: geo-FENNEL Страницы: 56

Бренд: METREL Страницы: 29

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды