Campbell CWS Series, Инструкция по эксплуатации

Страница: 66 / 70

Appendix C. Battery Life
Sensor and
Connection
5 Min Polling
10 Min Polling
15 Min Polling
CWS900 w/109
Probe or CWS655 15 months 21 months 24 months
Same as above,
used as a repeater
for 1 sensor 8 months 12 months 15 months
Same as above,
used as a repeater
for 2 sensors 6 months 8 months 12 months
C.3 RF Connection Type Setting
In the Device Configuration Utility Settings editor, there is a setting called RF
Connection Type. This setting is used to control how the radio does its auto-
discovery of a path to the base station. The default setting is
Auto Connect ,
which is what should be used for most networks. With this setting, a sensor
first tries to find a direct path (one hop) to the base; it does this three times over
15 minutes. It then tries to find a path to the base using a repeater. It also does
this three times.
It can be useful to change this setting from its default in certain instances. For
example, if the wireless sensor network is composed of a large number of
sensors that are all within range of the base, changing it to
Connect Direct to
Base will force all the connections to the base. There will be no attempt to use
repeaters. As long as every sensor is within range of the base, this saves
battery power.
To access the RF Connection Type Setting, connect to the CWS sensor as
described in Appendix A and select the Settings Editor tab. Find the drop-
down menu for RF Connection Type and choose the option desired.
C-2