Campbell CSM1, Инструкция по эксплуатации

Страница: 71 / 74

C-1
Appendix C. SMCRead Error Messages
Error: No card found in slot number #
The PC cannot find the card in the slot specified.
Error writing data to filename, check disk space and try
again.
A file system error has occurred when writing a program file to disk. Check
for available disk space or disk corruption.
Program nn not found.
There is no program nn in the card.
Error - no room on card.
Shown when loading a .DLD program into a memory card when there is not
enough space left.
Directory does not exist
When requesting the program to display a list of files in a specific directory
you have entered an invalid directory name.
No matching files found
When requesting the program to display a list of files using a wildcard
character, no files of that type could be found.
Inadequate disk space available!
When collecting data the program has found there is not enough space to write
the next data block to disk.
Filename: xxxxxxx is too long - maximum 6 characters.
The file name you have specified is too long. There must be space for the 2-
digit index that SMCRead appends to the end of the prefix of the name.
Error opening xxxxxxx check if the file exists, or is
empty.
SMCRead was unable to open a specified file.
Error creating xxxxxxx check filename.
When creating a new file a disk error has occurred. This may be because you
have specified an invalid file name.