Campbell CS511, Руководство по эксплуатации продукта

Страница: 8 / 27

CS511 Dissolved Oxygen Sensor
2
3.1 Shipping Kit
The CS511 ships with:
(1) Membrane replacement tool
(1) Bottled electrolyte, 250 ml
(2) Teflon membranes
(2) Membrane O-rings
4. QuickStart
A video that describes datalogger programming using Short Cut is available at:
www.campbellsci.com/videos/cr1000x-datalogger-getting-started-program-
part-3
.
Short Cut
is an easy way to program your datalogger to measure the
sensor and assign datalogger wiring terminals. Short Cut is available as a
download on www.campbellsci.com . It is included in installations of
LoggerNet , PC200W , PC400 , or RTDAQ .
The following procedure also describes using Short Cut to program the CS511.
1. Open Short Cut and click Create New Program .
2. Double-click the datalogger model.
3. In the Available Sensors and Devices box, type CS511, or locate the
sensor in the Sensors | Water | Quality folder. Double-click CS511
Dissolved Oxygen Probe . The default calibration value of 0.34 is based
on an average. It is preferable to calibrate the sensor by using the
procedure provided in Section 7.5 , Calibration
(p. 9)
. Click on the Wiring
tab to see how the sensor is to be wired to the datalogger.