Appendix B. Terminal mode
You can use the CRVW3 terminal mode for troubleshooting and configuration. Contact with
Campbell Scientific support personnel is recommended before using this feature. The two most
common ways to access the terminal mode are within
Device Configuration Utility
and using the
Connect Screen of
LoggerNet
. When using the terminal mode in
LoggerNet
, you can make the
connection to a remote station over a radio link without having to travel to the CRVW3 site.
NOTE:
The pause instruction temporarily stops the program. However, after 2 hours, the program
automatically resumes and a watchdog.txt file is written, containing the following text:
“Watchdog timer Run Program Service triggered.”
CRVW3 3-Channel Vibrating-Wire Data Logger
75