CRVW3 3-Channel Vibrating-Wire Datalogger
2
FIGURE 1-2. The CRVW3-NE 3-Channel Vibrating-Wire Datalogger
The CRVW3 is available in both enclosure and non-enclosure versions. The
standard CRVW3 is packaged inside a protective enclosure. On-board power
support for a rechargeable battery (including a built-in charge regulator) or
non-rechargeable D-cells is included. The non-enclosure version, the
CRW3-NE, comes without the enclosure and battery. While this manual refers
mainly to the enclosure version, the configuration is identical for both models.
Multiple built-in radio options (–RF407, –RF412, –RF422, –RF427, and
–RF451) are available to enable the creation of wireless networks. All radio
options except the –RF427 are available in both enclosure and non-enclosure
versions. The –RF427 is only available in the non-enclosure version.
•
The RF407 has a 902 to 928 MHz operating-frequency range
appropriate for use in the United States and Canada. (FCC / IC / IFT
compliant)
•
The RF412 has a 915 to 928 MHz operating-frequency range
appropriate for use in Australia and New Zealand. (ACMA compliant)
•
The RF422 has an 863 to 870 MHz operating-frequency range
appropriate for use in most of Europe and some of Asia. (ETSI
compliant)
•
The RF427 has a 902 to 907 and 916 to 928 MHz operating-frequency
range appropriate for use in Brazil. (ANATEL compliant)
•
The RF451has a 902 to 928 MHz operating-frequency range
appropriate for use in the United States and Canada. (FCC / IC / IFT
compliant) The RF451 can also be used in Australia and New Zealand
but must be purchased directly from Campbell Scientific Australia to
ensure that it is properly configured and badged for ACMA
compliance.
Содержание CRVW3
