CRVW3 3-Channel Vibrating-Wire Datalogger
88
Details for using the
Schedule
and
Data Files
tabs of a datalogger to set up
scheduled collection is documented in Section 4.2 and 4.2.5 of the
LoggerNet
manual. Please refer to that document for guidance in accomplishing this task.
s.campbellsci.com/documents/us/manuals/LoggerNet.pdf
Once scheduled collection has been configured and activated, you can open the
Status Monitor
application in
LoggerNet
to ensure that
LoggerNet
is
connecting with each station and that its data is being collected properly. To
open
Status Monitor
, choose the heartbeat icon from the Main category of the
LoggerNet
toolbar:
Please refer to Section 6 of the
LoggerNet
manual for more details about using
the
Status Monitor
.
, Section
, and Section
, of this manual for information regarding how to
operate, maintain, and troubleshoot CRVW3 networks.
11. Operation of CRVW3 Networks
Once your CRVW3 stations, repeaters, and base station are deployed and
operating, and
LoggerNet
can connect with and collect from each station, your
attention should turn to the operation of your CRVW3 network. Most of this
work is done using
LoggerNet
and related tools. The data collection process is
one of the most important operational activities that occurs on your network.
Refer to the
LoggerNet
manual for detailed instructions about any use of that
software:
s.campbellsci.com/documents/us/manuals/loggernet.pdf
11.1 Monitoring Automatic Data Collection
Most CRVW3 devices that have been configured to be part of a radio network
will also be part of an automatic collection schedule that is executed by
LoggerNet
. For more information about configuring
LoggerNet
to use
automatic data collection, see Section
(p. 87)
.
In order for automatic data collection to occur, the
LoggerNet
toolbar n must be
running (or the
LoggerNet Service
must be started in the case of
LoggerNet
Admin
installations). Use the
LoggerNet
Status Monitor
to assess the
connectivity and collection status for all of the CRVW3 devices on your
network. The
Status Monitor
shows whether
LoggerNet
is connecting with
each station and whether that station’s data is being collected properly. To
open
Status Monitor
, choose the heartbeat icon from the
Main
category of the
LoggerNet
toolbar:
Содержание CRVW3
