CRVW3 Public table. The Public variable value will be subtracted from the calculated engineering
result to give the final engineering output.
The Public variables used are shown in the following table:
Table D-2: Public variables and channel numbers
Public variable
Channel number
Pressure_Chan1_FC
1
Pressure_Chan2_FC
2
Pressure_Chan3_FC
3
Pressure_All
All
When the
Pressure_All
variable is used, or when it is set to a non-0 value, all enabled
channels will use that value. If
Pressure_All
is left at 0, the values given for individual
channels will be used.
NOTE:
It will be necessary to set the values of these variables from an external Campbell Scientific
data logger that has measured the current atmospheric pressure. Use
SendVariables()
,
or similar, in its CRBasic program.
CRVW3 3-Channel Vibrating-Wire Data Logger
84
