Campbell CR3000 Micrologger, Руководство оператора

Страница: 464 / 644

Section 8. Operation
464
Power-up.ini Execution
After powerup.ini is processed, the following rules determine what CR3000
program to run:
•
If the run-now program is changed, then it is the program that runs.
•
If no change is made to run-now program, but run-on-power-up program
is changed, the new run-on-power-up program runs.
•
If neither run-on-power-up nor run-now programs are changed, the
previous run-on-power-up program runs.
8.8.5.5 File Management Q & A
Q: How do I hide a program file on the CR3000 without using the CRBasic
FileManage() instruction?
A: Use the CoraScript
(p. 533)
File-Control command, or the Web API
(p. 475,
p.
475) FileControl command.
8.8.6 File Names
The maximum size of the file name that can be stored, run as a program, or FTP
transferred in the CR3000 is 59 characters. If the name is longer than 59
characters, an Invalid Filename error is displayed. If several files are stored, each
with a long filename, memory allocated to the root directory can be exceeded
before the actual memory of storing files is exceeded. When this occurs, an
"insufficient resources or memory full" error is displayed.
8.8.7 File System Errors
Table File System Error Codes
(p. 464)
lists error codes associated with the CR3000
file system. Errors can occur when attempting to access files on any of the
available drives. All occurrences are rare, but they are most likely to occur when
using the CRD: drive.
File System Error Codes
Error Code Description
1 Invalid format
2 Device capabilities error
3
Unable to allocate memory for file operation
4 Max number of available files exceeded
5 No file entry exists in directory
6
Disk change occurred