Campbell CMP11, Инструкция по эксплуатации

Страница: 11 / 48

CMP6, CMP11, and CMP21
Pyranometers
1. Introduction
CMP-series pyranometers are designed for continuous outdoor monitoring of
solar radiation intensity. A flat spectral sensitivity from 285 to 2800 nm
enables accurate measurements in natural sunlight, under plant canopies, and in
green houses or buildings. When inverted, these pyranometers can measure
reflected solar radiation. Uses include monitoring global horizontal irradiance
(GHI) and plane of array irradiance (POA). Diffuse sky radiation can also be
measured with the use of a shade mechanism.
This manual provides information only for CRBasic dataloggers.
It is also compatible with many of our retired Edlog dataloggers.
For Edlog datalogger support, see an older manual at
www.campbellsci.com\old-manuals or contact a Campbell
Scientific application engineer for assistance.
2. Cautionary Statements
•
READ AND UNDERSTAND the Precautions section at the front of this
manual.
• CMP-series pyranometers are rugged, but they should be handled as
precision scientific instruments.
•
Care should be taken when opening the shipping package to not damage or
cut the cable jacket. If damage to the cable is suspected, consult with a
Campbell Scientific applications engineer.
3. Initial Inspection
Check the contents of the shipment. If there is a shortage (see Section 3.1 ,
Ships With
(p. 1)
), contact Campbell Scientific. If any damage has occurred
during transport, immediately file a claim with the carrier and contact
Campbell Scientific to facilitate repair or replacement.
The model number and cable length are printed on a label at the connection end
of the cable. Check this information against the shipping documents to ensure
the correct product and cable length are received.
3.1 Ships With
(2) Bolts for mounting from original manufacturer
(1) Instruction Manual from original manufacturer
(1) Sun Shield from original manufacturer
(2) Nylon washers from original manufacturer
NOTE
1