Campbell CM300 Series, Руководство по эксплуатации продукта, Страница: 7 / 13

CM300-Series Mounting Poles
5
Place a flat washer on each J-bolt, resting it on the two nuts already there.
Place the pedestal over the J-bolts and install a flat washer, split washer, and
nut on each J-bolt — do not tighten the nuts at this time.
Adjust the lower nuts on each J-bolt to plumb the pole. “Lock” the lower nuts
together by using two wrenches. Tighten the upper nuts to secure the pedestal
to the J-bolts.
FIGURE 3-4. CM305 Mounting Pole with Pedestal J-Bolt Kit
3.4 CM300-Series Mounting Pole with Pedestal Legs
A CM300-series pole with a Pedestal Leg option is used for temporary
installations or for applications where a concrete foundation is not an option.
The 58 cm (23 in) Pedestal Legs are adequate for most applications. The 99 cm
(39 in) Pedestal Legs provide additional stability for applications where the
feet cannot be secured (for example, to the surface of a roof), for extended
poles, or for locations with high winds.
Each leg attaches to the pedestal base with an adjustable bolt and quick release
pin. The pedestal base has a set of six holes for each leg. The angle of the legs,
and resultant pedestal height, is determined by which hole the quick release pin
is placed through (see TABLE 3-1 ).
CM300-Series Pole
Pedestal J-bolt Kit
4 cm (1.5 in)
Nut
Split Washer
Flat Washer
Flat Washer
Nut