MAINTENANCE /
REP
AIR
TROUBLESHOOTING
OPERA
TION
ASSEMBL
Y /
INST
ALLA
TION
SAFETY /
SPECIFICA
TIONS
GETTING ST
AR
TED
8
Figure 3
Shipping
Bolt
Shipping
Bracket
Shipping
Bolt
INSTALLATION INSTRUCTIONS (CONTINUED)
Picking the Location
Operate unit at least 18 inches from any
obstructions in a clean, well ventilated area. The
surrounding air temperature should not exceed
100° F. This will ensure an unobstructed flow of air
to cool compressor and allow adequate space for
maintenance.
NOTE:
If compressor operates in a hot, moist
environment, supply compressor pump with clean,
dry outside air. Supply air should be piped in from
external sources.
Assembly Instructions
1. Unbolt the unit from the shipping skid. Use a
ratchet with a 9/16 in. socket. Remove the unit
from the skid. Discard shipping hardware once
removed. See Figure 3.
2. Install rubber feet with nuts and washers.
See Figure 4.
Figure 4
Nut
Rubber Foot
18 inches
18 inches
Figure 2
18 inches
Do not locate the compressor air inlet near steam,
paint spray, sandblast areas or any other source
of contamination.
Содержание CE1000
Страница 67: ...NOTES NOTAS...
Страница 68: ...NOTES NOTAS...