Campbell CCFC, Руководство по эксплуатации продукта

Страница: 57 / 144

Table 14-7: External Trigger Variables for Photos
Variable
Allowable
Values
Description
Enable + Opens External Trigger:Create New Profile to add parameters.
Title Text
Name the setting in order to navigate to it at a later date. Also acts as
a directory name in the File Explorer (see
File explorer (p. 73)).
External
Trigger
Active High Configures External Trigger to capture on a positive voltage.
Active Low Configures the External Trigger to capture with 0 volts.
Lens
Position
Checkbox
Select 1- 4 lens positions for the capture ( Lens Position (p. 62)).
Selecting the green position title opens the Lens Position modal to
edit the selected lens position.
Enable
Photo
Capture
Toggle Initiates the capture of photos and opens the photo capture settings.
Take a Single
Photo
Set to capture one photo at the set time.
Take a Series
of Photos
Enter the Number of Images and Interval in Seconds (time between
photos) to create a photo burst. Maximum allowable value is 60. This
applies to each lens position, so with all 4 lens positions activated, it
will take 240 photos. With multiple lens positions enabled during a
photo burst, the camera may not be able to meet the timing
requirements as configured but it will complete all image captures
enabled in the event. The camera will not go to sleep in the middle of
a photo burst capture.
CCFC Field Camera 51