Campbell 27106T, Инструкция по эксплуатации

Страница: 11 / 28

1
27106T Vertical Propeller Anemometer
1. Introduction
The 27106T Vertical Propeller Anemometer is a low threshold precision air
velocity sensor that is especially suited for monitoring the vertical wind
component. It connects directly to a Campbell Scientific datalogger, which
measures the 27106T signal and converts the signal to engineering units (mph,
m/s, knots).
This manual provides information only for CRBasic dataloggers.
It is also compatible with most of our retired Edlog dataloggers.
For Edlog datalogger support, see an older manual at
www.campbellsci.com/old-manuals or contact a Campbell
Scientific application engineer for assistance.
2. Precautions
•
READ AND UNDERSTAND the Safety section at the front of this
manual.
• The 27106T is a precision instrument. Please handle it with care.
• Make sure you have removed and accounted for all items from the
shipping carton before discarding the shipping foam and shipping carton.
The foam can hide some of the items.
• The black outer jacket of the cable is Santoprene® rubber. This compound
was chosen for its resistance to temperature extremes, moisture, and UV
degradation. However, this jacket will support combustion in air. It is rated
as slow burning when tested according to U.L. 94 H.B. and will pass
FMVSS302. Local fire codes may preclude its use inside buildings.
3. Initial Inspection
Upon receipt of your shipment, immediately open the shipping carton and
ensure that you have all of the 27106T’s components. If an item is not initially
visible, remove the foam from the shipping carton and thoroughly inspect both
sides of the foam for the item. Immediately contact Campbell Scientific if any
item is missing.
The shipping carton should include:
• 16-inch-by-2-inch-by-2-inch box label l ed Propeller
Anemometer , which contains the propeller shaft
•
9-inch-by-9-inch-by-2-inch box label
l
ed Carbon Fib re Propeller
• Cable (routed through the mounting pipe to mating connector)
• 3/4-inch IPS threaded pipe (pn # 1180)
NOTE