1. Introduction
The 27106T vertical propeller anemometer is a low threshold precision air velocity sensor that is
especially suited for monitoring the vertical wind component. It connects directly to a Campbell
Scientific data logger, which measures the 27106T signal and converts the signal to engineering
units (mph, m/s, knots).
NOTE:
This manual provides information only for CRBasic data loggers. For retired Edlog data logger
support, see an older manual at
www.campbellsci.com/old-manuals
.
2. Precautions
l
READ AND UNDERSTAND the
section at the back of this manual.
l
The 27106T is a precision instrument. Please handle it with care.
l
The black outer jacket of the cable is Santoprene® rubber. This compound was chosen for
its resistance to temperature extremes, moisture, and ultraviolet (UV) degradation.
However, this jacket will support combustion in air. It is rated as slow burning when tested
according to U.L. 94 H.B. and will pass FMVSS302. Local fire codes may preclude its use
inside buildings.
3. Initial inspection
Upon receipt of your shipment, immediately open the shipping carton and ensure that you have
all of the 27106T components. If an item is not initially visible, remove the foam from the shipping
carton and thoroughly inspect both sides of the foam for the item. Immediately contact
Campbell Scientific if any item is missing.
Make sure you have removed and accounted for all items from the shipping carton before
discarding the shipping foam and shipping carton. The foam can hide some of the items.
27106T Vertical Propeller Anemometer
1
