Campbell 27106T, Руководство по эксплуатации продукта

Страница: 4 / 21

The shipping carton should include:
l
16-inch-by-2-inch-by-2-inch box labeled Propeller Anemometer, which contains the
propeller shaft
l
9-inch-by-9-inch-by-2-inch box labeled Carbon Fiber Propeller
l
Cable (routed through the mounting pipe to mating connector)
l
3/4-inch IPS threaded pipe
4. QuickStart
A video that describes data logger programming using Short Cut is available at:
www.campbellsci.com/videos/cr1000x-datalogger-getting-started-program-part-3 . Short Cut
is an easy way to program your data logger to measure this sensor and assign data logger wiring
terminals. Short Cut is available as a download on www.campbellsci.com . It is included in
installations of LoggerNet , RTDAQ , or PC400 .
Use the following procedure to get started.
1. Open Short Cut and create a new program.
2. Double-click the data logger model.
27106T Vertical Propeller Anemometer 2