Campbell 108, Инструкция по эксплуатации

Страница: 11 / 31

Model 108 Temperature Probe
2
3. In the search box under the
Available Sensors and Devices
heading, type
in 108 or find the 108 in the Sensors | Temperature folder. Double-click
the 108 Temperature Probe . Data defaults to degree Celsius. This can be
changed by clicking the Deg C box and selecting Deg F, for degrees
Fahrenheit, or K, for Kelvin. After entering the Properties , click on the
Wiring tab to see how the sensor is to be wired to the datalogger.
4. Select any other sensors you have, and then finish the remaining
Short Cut
steps to complete the program.