Campbell 108, Руководство по эксплуатации продукта

Страница: 11 / 26

7. Installation
If you are programming your data logger with Short Cut , skip Wiring to data logger (p. 6) and
Data logger programming (p. 6). Short Cut does this work for you. See QuickStart (p. 1) for a Short
Cut tutorial.
7.1 Wiring to data logger
Table 7-1: Wire colo
ur
, function, and data logger connection
Wire colo
u
r Wire function Data logger connection terminal
Black Voltage-excitation input
U configured for voltage excitation
1
,
EX, VX (voltage excitation)
Red Analog
ue
-voltage output
U configured for single-ended analog
ue
input
1
,
SE (single-ended, analog
ue
-voltage input)
Purple Bridge-resistor ⏚ (analog
ue
ground)
Clear EMF shield ⏚ (analog
ue
ground)
1
U terminals are automatically configured by the measurement instruction.
7.2 Data logger programming
Short Cut is the best source for up-to-date data logger programming code.
If your data acquisition requirements are simple, you can probably create and maintain a data
logger program exclusively with
Short Cut . If your data acquisition needs are more complex, the
files that Short Cut creates are a great source for programming code to start a new program or
add to an existing custom program.
NOTE:
Short Cut cannot edit programs after they are imported and edited in CRBasic Editor .
A Short Cut tutorial is available in QuickStart (p. 1). If you wish to import Short Cut code into
CRBasic Editor to create or add to a customized program, follow the procedure in Importing
Short Cut code into CRBasic Editor (p. 14). Programming basics are provided in the following
section. A complete program example can be found in Example program (p. 15).
108 Temperature Probe 6