Model 107 Temperature Probe
7
Tools required for installing a radiation shield to a tripod or tower include:
•
1/2-inch open end wrench
•
UV resistant cable ties
•
adjustable wrench with a minimum 1-1/2 inch jaw size
FIGURE 7-1. Installing a 107 and 41303-5A Radiation Shield on a
CM200-Series Crossarm
FIGURE 7-2. 107 and 41303-5A Radiation Shield on a tripod mast
(left). 107 and RAD06 Radiation Shield on a CM200-Series
Crossarm (right).
The 107 is held in the 41303-5A radiation shield by a mounting clamp at the
bottom (FIGURE
left). Loosen the mounting clamp
screws, and insert the probe through the clamp. Tighten the screws to secure
the sensor, and route the sensor cable to the instrument enclosure.
