![background image](http://html.mh-extra.com/html/campbell-hausfeld/xt001000/xt001000_operating-instructions-manual_489789005.webp)
3
GETTING TO KNOW YOUR UNIT
SET UP INSTRUCTIONS
BEST PRACTICES
u
The air compressor used with your impact wrench must be able to maintain a
minimum of 90 PSI when the tool is being used. An inadequate air supply can
cause a loss of power and inconsistent tool output/performance.
u
A pressure regulator—used at the tool--is helpful to control the operating pressure
of the tool and maintain 90 PSI.
u
Use an oiler to provide oil circulation through the tool and a filter to remove liquid
and solid impurities which can rust or “gum up” internal parts of the tool.
u
To disconnect a coupler/plug from a system set-up: push the coupler and plug
together before pulling the coupler sleeve back and separating the coupler and
plug.
u
Use only sockets specifically rated as “impact” drive sockets. Non-impact drive
sockets—if used with air tools—can shatter causing serious personal injury.
Plug
Quick
Coupler
Air Hose
* Items shown in Set Up Instructions are not included with this tool.
Air Inlet
Exhaust Port
Anvil
Trigger
Forward-Reverse
Dial/Air-flow
Regulator
Содержание XT001000
Страница 11: ...9 NOTES ...
Страница 25: ...Fr9 NOTES ...
Страница 39: ...Pg9 NOTAS ...
Страница 53: ...Sp9 Sp9 NOTAS ...