4
www.campbellhausfeld.com
Operating Instructions
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Check
for loose, missing or damaged
parts. Make sure to tighten fittings,
bolts, etc., before using the pressure
washer. Check to be sure all supplied
accessories are enclosed with the
unit. If any parts are missing, DO
NOT RETURN THE UNIT TO THE
RETAILER. Know the unit’s model
number, serial number and date code
(located on the back of the pressure
washer) and call 1-800-543-6400 for
replacement parts.
Do not operate
the unit if it’s
damaged during shipping, handling, or
use. Damage could result in bursting
and cause injury or property damage.
RECOMMENDED USES FOR THIS
PRESSURE WASHER
◆
Deck
◆
Siding
◆
Vehicles
◆
Gutters (with right angle nozzle)
ADDITIONAL ITEMS NOT
INCLUDED
◆
ANSI Z87 Eye Protection
◆
Garden Hose
NOTE:
For the PW190200 only - Hold
on to the handle of the unit while
unreeling the hose. This will prevent
the unit from toppling over.
NOTE:
Built-in detergent bottle to be
used only when LP high flow nozzle is
connected to lance for spraying.
Figure 2 - Components of the Pressure Washer
Unpacking
Cleaning
Gun with
Trigger
Handle
Lance
Power
Cord
High Pressure
Hose
PW190100
Water Hose
Inlet
On/Off Switch
PW190200
Handle
High Pressure
Hose
Power
Cord
Water Hose
Inlet
Lance
On/Off Switch
Cleaning
Gun with
Trigger
15°
25°
40°
15°
25° Nozzle
0° Nozzle
45° Nozzle
PW190200 ONLY
PW190100 ONLY
LP high
flow nozzle
Detergent
Bottle
LP high flow
nozzle
15° Nozzle
Variable
nozzle