Operating Instructions and Parts Manual
Pressure Regulator
Specifications
Regulator
Self
Style . . . . . . . . . . . . . . . Relieving
Temperature
Range . . . . . . . . . 40°F to 140°F
Maximum
Pressure . . . . . . . . . . . . . 250 PSI
Air Inlet/Outlet . . . . 3/8 inch NPT
Rated Flow . . . . . . . . . . 48 SCFM
Model PA210100AV
Description
The self-relieving pressure regulator can be used
between the air supply and an air tool to control the
air pressure on lines. The regulated output pressure
range is 0-215 PSI.
Unpacking
After unpacking the unit, inspect carefully for any
damage that may have occurred during transit.
Make sure to tighten fittings, bolts, etc., before
putting unit into service.
Read & Follow all InstRuctIons
save these InstRuctIons
do not dIscaRd
Safety Guidelines
This manual contains information that is very
important to know and understand. This information
is provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help recognize this
information, observe the following symbols.
Danger indicates an
imminently hazardous
situation which, if not avoided, WILL result in death
or serious injury.
Warning indicates a
potentially hazardous
situation which, if not avoided, COULD result in
death or serious injury.
Caution indicates a
potentially hazardous
situation which, if not avoided, MAY result in minor
or moderate injury.
Notice indicates
important information, that if
not followed, may cause damage to equipment.
IN738700AV 9/12
© 2012 Campbell Hausfeld/Scott Fetzer
For parts, product & service information visit
www.campbellhausfeld.com
Figure 1 - Pa210100av