MANTENIMIENTO
/ REP
ARACION
IDENTIFICACION
DE PROBLEMAS
OPERACION
MONT
AJE / INST
ALACION
SEGURIDAD /
ESPECIFICACIONES
PARA COMENZAR
Sp4
INSTRUCCIONES DE OPERACIÓN
3. Conecte el accesorio adecuado para inflar el objeto que desea inflar.
4. Encienda la unidad y el compresor.
5. Cuando el objeto esté firme, apague el inflador. No infle nigún objeto excesivamente.
Bateria de 12 V de corriente directa
Esta unidad puede utilizarse para suministrarle energía a artefactos que funcionen con corriente directa de
12 V, 10 A o menos. Para hacerlo, sólo conecte el artefacto al enchufe de salida de 12 V de corriente directa.
No trate de conectar artefactos diseñados para operar con más de 10A, 12 V.
Para reemplazar el fusible
Antes de reemplazar el fusible, cerciórese de que la unidad esté apagada y de que no haya nada conectado
al inflador. La unidad viene de fábrica con un fusible de 10 A de repuesto (Para ubicar el fusible, vea
“Especificaciones y Características”). NUNCA utilice un fusible de más de 10 A. para reemplazar el fusible
de esta unidad.
Almacenamiento
Este inflador debe almacenarse a temperaturas entre 19°C (65°F) y 24°C (75°F) con el adaptador universal
abierto. Cerciórese de que el interruptor esté en OFF (apagado).
PARA DESECHAR LA BATERIA
Este producto tiene una batería recargable sellada de plomo-ácido. Las leyes de protección ambiental en
algunos estados requieren que los comerciantes acepten estas baterías para desecharlas adecuadamente.
Cerciórese de cumplir con las leyes al respecto cuando vaya a desechar este producto.
SERVICIO TÉCNICO
Para mayor información sobre el funcionamiento o reparación de este producto, comuníquese al 1-800-543-
6400.