Manual de Instrucciones y Lista de Piezas
Glosario
Familiarícese con estos términos antes de poner la unidad en funcionamiento.
ACTIVAR (HERRAMIENTA) —
Producir el movimiento del (de los)
componente(s) de la herramienta diseñado(s) para impulsar el sujetador.
SISTEMA DE ACTIVACIÓN -—
El uso de un gatillo, elemento de contacto de
trabajo (WCE) y/o otro control de funcionamiento, de modo independiente, en
combinación o en secuencia, para activar la herramienta.
ENTRADA DE AIRE —
La abertura en que se conecta el suministro de aire
comprimido, por lo general a través de una conexión roscada.
CLAVOS EN “L” —
Un tipo de sujetador que se usa para ajustar pisos de madera
dura machihembrados
(Ver Figura 8)
.
CARGADOR —
La parte de la clavadora en que se guardan las grapas y los clavos
en “L”
(Ver Figura 10)
.
PRESIÓN DE AIRE MáXIMA —
La presión máxima de aire comprimido
permisible, según lo especificado por el fabricante, para el funcionamiento de la
herramienta.
REGULADOR DE PRESIÓN —
Una válvula que detiene automáticamente el flujo
de un líquido o gas a cierta presión, por lo general con el fin de evitar daños en la
herramienta.
BAR/PSI (LIBRAS POR PULGADA CUADRADA) —
Unidades de medida de la
presión ejercida por la fuerza del aire. La salida real en bar/psi se mide con un
manómetro en el compresor.
ACOPLADOR RáPIDO —
Un acoplador rápido está diseñado para trabajar
en combinación con un conector rápido para unir rápida y fácilmente una
herramienta neumática con una manguera de aire
(Ver Figura 6)
.
CONECTOR RáPIDO —
Un conector rápido está diseñado para trabajar en
combinación con un acoplador rápido para unir rápida y fácilmente una
herramienta neumática con una manguera de aire
(Ver Figura 7)
.
COLOCACIÓN —
La colocación es el proceso de ubicar el piso antes de que sea
clavado o grapado.
REGULADOR —
Un dispositivo usado para controlar la presión del aire que pasa
a una herramienta neumática
GRAPAS —
Un tipo de sujetador que se usa para ajustar pisos de madera dura
machihembrados
(Ver Figura 9)
.
PEGAMENTO FIJADOR DE ROSCAS —
Un pegamento para fijar que se aplica
a las roscas de los tornillos antes de instalarlos. Evita que los tornillos se aflojen
durante el funcionamiento de la herramienta.
Figura 6 - acoplador rápido
Figura - Conector rápido
Figura 8 - Clavos en “l”
Figura - grapas
S-