manualshive.com logo in svg

Campania International Rosette M Series, Инструкция по сборке

Поделиться
Скачать
Campania International Rosette M Series Скачать руководство пользователя страница 3

FT-164 M-Series Rosette Fountain

Assembly Instructions

Step 6 -   Fill the basin enough to cover the pump completely with water to check for leaking.

6a - If leaking occurs…

 

 

- Remove the stopper and repeat step 5 again.

 

 

-  Use some of the excess putty to seal the cord around the top of the stopper. 

See image “D”.

 

 

-  Let the fountain dry completely, then use 100% clear silicone to seal around the 

pump cord and perimeter of the stopper. Silicone must set for 24 hours before 
adding water.

D

Step 7 -   Holding the water feature (FT-164A) over the basin (FT-164B), insert the CPVC end of the 

tubing into the coupling protruding from the bottom.

Step 8 -  Center the water feature (FT-164A) into basin (FT-164B).

Step 9 -  Connect the pump cord to the transformer.

FT-164A 3 lbs)

7.25"W x 1.25"H

Содержание Rosette M Series

Страница 1: ...tage Pump 16 ft cord length Tools Required Bubble Level Screwdriver Scissors Pump Kit Parts List Image Component Quantity PK120 LV Pump with Transformer 1 7 Stopper 1 2 length of PermaGum Putty 1 Approx 8 length of 1 2 black non kink tubing 1 1 length of 5 8 clear tubing 1 1 length of 1 2 CPVC pipe 1 Adhesive Dots 4 Hose Clamps 1 Fountain Components Image Item Description Component Item Quantity M...

Страница 2: ... components seem off rotate components or use wedges to level them Step 3 Create a Drip Loop To prevent water from dripping down the cord and damaging the electrical socket create a drip loop by allowing the pump power cord to fall below the wall outlet Step 4 Use a GFCI Outlet Use only a GFCI outlet when running a fountain Step 3 Assemble the pump kit 3a NOTE Do not plug the pump into the transfo...

Страница 3: ...the stopper See image D Let the fountain dry completely then use 100 clear silicone to seal around the pump cord and perimeter of the stopper Silicone must set for 24 hours before adding water D Step 7 Holding the water feature FT 164A over the basin FT 164B insert the CPVC end of the tubing into the coupling protruding from the bottom Step 8 Center the water feature FT 164A into basin FT 164B Ste...

Страница 4: ...is completely seated in the fountain You can also use 100 pure clear silicone to ensure a proper seal is achieved Step 4 Cracking Your fountain may be cracked from improper winter care see Winter Care in Maintenance Tips Maintenance Pump Care The fountain relies heavily on the quality of the pump A well maintained pump can last several years Step 1 Fully submerge Ensure the pump is fully submerged...

Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды