FT-389 Katsura Fountain with Pedestal
Assembly Instructions
Step 6 -
Fill the basin enough to cover the pump completely with water to check for leaking.
6a -
If leaking occurs…
- Remove the stopper and repeat step 5 again.
- Use some of the excess putty to seal the cord around the top of the stopper. See
image “D”.
- Let the fountain dry completely, then use 100% clear silicone to seal around the
pump cord and perimeter of the stopper. Silicone must set for 24 hours before
adding water.
Step 7 -
Holding the water feature (FT-378A) over the basin (FT-378B), insert the CPVC end of the
tubing into the coupling protruding from the bottom.
Step 8 -
Center the water feature (FT-378A) into basin (FT-378B).
Step 9 –
Using the silicone provided, secure the copper spillers to the top lip of the water feature.
Step 10 -
Connect the pump cord to the transformer.
FT-378A (18 lbs)
20"L x 11.5"W x 3.25"H
D
