FT-102 Girona Fountain
Assembly Instructions
Two people are recommended for the installation of this fountain!
Assemble your fountain on a level surface capable of holding a minimum of 420 lbs with an
approximate 1.5 sq. ft. footprint (actual dimensions 15.5" Diam.).
Step 1 - Position the basin (FT-102B) where the fountain is to be installed, ensuring that it is level.
Step 2 - Assemble the pump kit:
2a - Using a hose clamp, connect the tubing to the pump outlet.
2b - Place the stopper around the pump cord approximately 6" from the pump.
Step 3 - Feed the pump cord through the hole and channel in the basin (FT-102B).
Step 4 - FIRMLY press the stopper into the hole evenly.
4a - Note: Using the handle of a screwdriver or hammer works best to press the stopper
in place.
FT-102B (229 lbs)
30"W x 15"H
Step 5 - Center the large disc (FT-102A) inside the basin (FT-102B), ensuring that it is centered
and level.
FT-102A (79 lbs)
25"W x 2.5"H
FT-102C (10 lbs)
7.5"W x 2.5"H
Step 6 - Holding the water feature disc (FT-102C) over the large disc (FT-102A), insert the CPVC
connected to the tubing assembly into the CPVC coupling protruding from the bottom.
Step 7 - Carefully place water feature disc (FT-102C) into the large disc (FT-102A) ensuring that it
is centered.
Step 8 - Fill the fountain with water.
