FT-387 Fountain
Assembly Instructions
Three people are recommended for the installation of this fountain!
Step 8 -
Place the pump cover (FT-387C) over the pump.
Step 9 -
Feed the tubing connected to the pump through the top of the pump cover (FT-387C).
Step 10 -
Connect the 1/2" non-kink tubing to the pipe protruding from the bottom of the small
bowl (FT-256B) with the hose clamp.
Step 11 -
Center the small bowl (FT-256B) on the pump cover (FT-387C).
Step 12 -
Fit the finial (FT-387A) into the small bowl (FT-256B) by feeding the protruding copper
pipe from the bowl into the copper pipe hole in the finial.
Step 13 -
Place the pump cover door (FT-387D) into the pump cover (FT-387C).
FT-387C (50 lbs)
10"W x 13"H
FT-256B (60 lbs)
22.25"W x 6.25"H
FT-387A (10 lbs)
5.5"W x 12.25"H
FT-387D (2 lbs)
5.75"L x 2"W x 4"H
