FT-302 Echo Park Fountain
Two people are recommended for the installation of this fountain!
Revised June 29, 2017
Assemble your fountain on a level surface capable of holding a minimum of 383 pounds with
an approximate 1 square foot footprint.
FT-302C (269 lbs)
28”W x 17.5”H
FT-302B (43 lbs)
24.25”W x 1.25”H
FT-302A (4 lbs)
7.5”W x 3”H
1.
Position the basin (FT-302C) where the fountain is to be
installed, ensuring that it is level.
2.
Assemble the pump kit
a.
Connect the tubing to the pump outlet.
b.
Place the stopper around the pump cord
approximately 6” from the pump.
3.
Feed the pump cord through the hole and channel in the
basin (FT-302C).
4.
FIRMLY press the stopper into the hole evenly.
a.
Note: Using the handle of a screwdriver or hammer
works best to press the stopper in place.
5.
Center the large disc (FT-302B) inside the basin, ensuring
that it is centered and level.
6.
Holding the water feature disc (FT-302A) over the large
disc (FT-302B), insert the PVC connected to the non-kink
tubing into the PVC coupling protruding from the bottom.
7.
Carefully place water feature disc (FT-302A) into the large
disc (FT-302B) ensuring that it is centered.
8.
Fill the fountain with water.
