FT-165 Lion Wall Fountain
Two people are recommended for the installation of this fountain!
Revised January 10, 2018
Assemble your fountain on a level surface capable of holding a minimum of 370 pounds with
an approximate 2 square foot footprint.
FT-165A (281 lbs)
26.5”L x 16”W x 40.5”H
FT-165B (6 lbs)
9”L x 5.5”W x 5.5”H
1.
Position the basin (FT-165A) where the fountain
is to be installed, ensuring that it is level.
2.
Assemble the pump and tubing
a.
Using a hose clamp, attach the 1/2” non-
kink tubing to the pump outlet.
b.
Place the stopper around the pump cord
approximately 6 inches from the pump.
3.
Feed the pump cord through the hole in the basin
(FT-165A).
4.
FIRMLY press the stopper into the hole evenly.
a.
Note: Using the handle of a screwdriver or
hammer works best to press the stopper in
place.
5.
Fit the clear tubing connected to the non-kink
tubing over the PVC protruding at the bottom of
the basin.
6.
Place the pump cover (FT-165B) over the pump.
7.
Fill the fountain with water.
